•Under fluorescent lights that flicker, even if you

choose , the white balance may not be properly adjusted.

•When the flash strobes, the manual setting is canceled, and the image is recorded in [Auto] mode (except in WB (Flash) mode or (One push) mode).

To capture the basic white color

in (one-push SET) mode

This mode memorizes the basic white color

in the shooting situation for the (One push) mode. Use this mode when the other modes cannot set the color properly.

1In Step 2, select [ ] (One push SET).

The indicator appears.

2Frame a white object such as a piece of paper filling the screen under the same lighting conditions as you will shoot the subject.

3Press the center of the multi-selector.

The screen momentarily turns black and

the indicator flashes quickly. When the white balance has been

adjusted and stored in the memory, the

indicator lights up.

•When the indicator flashes slowly, the white balance is not set or was not able to be

set. Record in automatic white balance mode.

•Do not shake or strike the camera while the

indicator flashes quickly.

•When flash mode is set to (Forced flash) or

(Slow synchro), the white balance is adjusted to the condition with the flash

emitting.

Selecting color reproduction

– Color

Mode dial: P/S/A/M

You can select the color reproduction mode.

Standard (No indicator)

Shoots to make the resulting shot easier on the eyes. The image becomes vivid compared to its real color and the contrast becomes higher.

The default setting is [Standard].

Real (REAL)

Shoots for faithfulness to the actual texture and color, which the contrast, brightness, and saturation become lower. This mode is suitable for modifying the image on a computer.

74