Using the self-timer

80min

8M

101

98

MAF

/

1

,Set the mode dial to , and

press / (self-timer).

The (self-timer) indicator appears on the screen.

•You can carry out this operation even when the

mode dial is set to P, S, A, M, SCN or .

80min

8M FINE 101

 

98

MAF

2 5 0 F 2 . 0 0 E V

2

,Center the subject in the frame, and press and hold the shutter button halfway down, then press the shutter button fully down.

The self-timer lamp (page 9) will flash, and you will hear a beeping sound. The image will be shot after approximately 10 seconds.

To cancel the self-timer during the operation

Press / (self-timer) again. The indicator dissapears from the screen.

•If you stand in front of the camera and press the shutter button, the focus and the exposure may not be correctly set.

Using the flash

Flash emitter

Hologram AF emitter

The flash automatically pops up and strobes when the surroundings are dark. Close the flash by hand after using it.

•When [ISO] is set to [Auto] in the menu settings, the recommended shooting distance

using the flash is approx. 0.5 m to 4.5 m

(19 3/4 inches to 14 feet 9 1/4 inches) (W)/0.6 m to 3.3 m (23 5/8 inches to 10 feet 10 inches) (T).

•Attaching the supplied lens hood blocks the flash light.

•While the flash is being charged, the(flash) lamp flashes. After charging is completed, the

lamp goes out.

•You can also select the following flash modes: (Forced flash),(Slow synchro), and (No flash). For details on these modes, see page

68.

34