•When [Mode] (REC Mode) is not set to [Normal], you cannot use the Multi Burst mode.
•The following functions cannot be used in Multi Burst mode:
–Smart zoom
–Shooting with the flash
–Inserting the date and time
–NightShot
–NightFraming
•When the mode dial is set to , frame interval is automatically set to [1/30].
•You cannot set the shutter speed to lower than the frame interval time.
•For the number of images that can be recorded, see pages 135, 136.
•When you play back images recorded in Multi Burst mode on the camera, see page 87.
Shooting in the dark
Mode dial: /P/
Shutter button
Command dial
Mode dial
Infrared ray | NIGHTSHOT/ |
emitter | NIGHTFRAMING |
•The infrared ray light covers within approx.
0.5 m to 2.1 m (19 3/4 inches to 6 feet 10 3/4 inches) (W)/0.6 m to 2.1 m
(23 5/8 inches to 6 feet 10 3/4 inches) (T).
•Since the infrared emitter is located below the flash emitter, you have to pop up the flash to shoot in these modes.
NightShot
The NightShot function lets you shoot subjects in dark places without the flash such as camp scenes at night or nocturnal plants and animals. Note that images recorded using the NightShot function become greenish.
aSet the mode dial to , P or
.
bPress and hold NIGHTSHOT/ NIGHTFRAMING and select (Night shot) with the command dial.
The flash emitter pops up and the and “Night shot” indicators light for about five seconds.
80min | 8M | 101 |
4
"Night shot"
MAF
cShoot the image.
To cancel the NightShot function
In Step 2, select [Off].
•While using the NightShot function:
–The white balance is set to Auto.
–The metering mode is set to center weighted.
shooting image still Advanced
77