Shooting with shutter speed priority mode

Mode dial: S

You can adjust the shutter speed manually. If you shoot a moving subject at a higher shutter speed, it appears as if frozen on the image. At a lower shutter speed, the subject appears as if it flowing.

Aperture value is automatically adjusted to attain correct exposure according to the brightness of the subject.

High shutter speed Slow shutter speed

Command dial

Shutter button

Mode dial

aSet the mode dial to S.

bSelect a shutter speed with the command dial.

80min

8M FINE 101

S98

 

200

 

S

250

 

 

320

 

 

MAF

F2.0 0EV

The shutter speed can be selected from 1/2000 to 30 seconds.

If you select 1/25 second or slower shutter speeds, the NR slow shutter function is automatically activated. In such cases, “NR” is indicated at the left of shutter speed indicator.

cShoot the image.

Shutter speeds of one second or longer are indicated with ["] after the value, such as 1".

If the proper exposure is not obtained after making the settings, the setting value indicators on the screen flashes when the shutter button is pressed halfway down. You can shoot in this condition, but we recommend that you adjust the flashing values again.

The flash is set to (Forced flash) or (No flash).

When the shutter speed is high, the amount of flash light may be insufficient even if you strobes the flash.

You can adjust the exposure value (page 59).

NR slow shutter

The NR slow shutter mode removes noise from recorded images, providing clear images. When using shutter speeds of 1/25 second or slower, the camera automatically works the NR slow shutter mode and “NR” is indicated next to the shutter speed indicator.

Press the shutter

F2.8 button fully down.

NR2''

r

Then the screen turns black.

Capturing

r

Finally, when “Processing”

Processingdisappears, the image has been recorded.

To eliminate the effects of vibration, use of a tripod is recommended.

When a slow shutter speed is set, the processing may take some time. This is because the camera works to remove noise during the time set by the shutter speed setting.

shooting image still Advanced

55