To remove the Microdrive/CF card
Setting the still image size
Open the CF card cover, then push the CF card eject lever so that the Microdrive/CF card is ejected.
8M | 8M |
3:2 |
|
5M
3M
1M
Image Size
Mode
|
|
|
|
|
|
|
|
| 8M | 8M |
| 8M |
| ||
| 3:2 |
|
|
| 3:2 |
|
|
| 5M |
|
| 5M | 5M | ||
| 3M |
|
| 3M |
| ||
| 1M |
|
| 1M |
| ||
|
|
|
|
|
|
|
|
| Image Size |
| Image Size |
| |||
|
| Mode |
|
|
| Mode |
|
|
|
|
|
|
|
|
|
1
MENU
2
Access |
| lamp | CF card eject |
| lever |
•Note that the Microdrive may be heated right after using the camera.
•Whenever the access lamp is lit, the camera is recording or reading out an image. Never remove the Microdrive/CF card or turn off the power at this time. The data may be corrupted or the Microdrive/CF card may become unusable.
,Set the mode dial to 
and turn on the power, then press MENU.
The menu appears.
•You can carry out this operation even when the mode dial is set to P, S, A, M, SCN.
,Select 
(Image Size) by moving the
The image size is set.
After the setting is completed, press MENU. The menu disappears from the screen.
•For more information about the image size, see page 25.
•This setting is maintained even when the power is turned off.
24