When [USB Connect] is not set to [PictBridge] in the SET UP settings

You cannot use the PictBridge function, even when you turn on the camera. Set [USB Connect] to [PictBridge].

1Press MENU and select [USB Connect], then press the center of the multi-

selector.

2Select [PictBridge] with v , then press the center.

USB Connect

PictBridge

PTP

Normal

Printing images

You can select an image and print it. Set up the camera following the procedure on page 93, and then connect the printer.

/

Multi-selector (v/V/b/B)

MENU

/CF switch

•You cannot print movies and images recorded in RAW mode.

•When printing E-mail mode images or uncompressed (TIFF) images, only their corresponding JPEG files are printed.

•If an error message is sent from the connected

printer during the connection, flashes for about five seconds. In such cases, check the printer.

•Note that printing is canceled if you switch the

/CF switch while printing images.

On the single screen

aSelect the recording medium

with the /CF switch and display the image you want to print with b/B.

bPress MENU.

The menu appears.

cSelect (Print) with b/B, then press the center of the multi-

selector.

dSelect [This image] with v/V, then press the center of the multi-selector.

The Print screen appears.

8M

101 2/9

Print

Index Off

Date Off

Quantity 1

Exit OK

eSelect [Quantity] with v/V, select the number of images with b/B.

You can select the number up to 20.

94