Changing items in the SET UP screen
aSet the mode dial to SET UP.
The SET UP screen appears.
Camera 1
AF Mode: | Monitor |
Digital Zoom: | Precision |
Date/Time: | Off |
Red Eye Reduction: Off
Hologram AF: Auto
Auto Review: Off
SELECT
bSelect the setting item you want to change by moving the
The frame of the item you select turns yellow.
Setup 2
File Number: |
|
|
USB Connect: |
|
|
Video Out: |
| OK |
Clock Set: |
| Cancel |
cPress the center of the multi- selector to enter the setting.
To turn off the SET UP screen display
Set the mode dial to any position other than
SET UP.
•For details on the SET UP items, see page 140.
How to use the command dial
There are two methods for operating the command dial. One is using only the command dial and the other is using the command dial in combination with other buttons. This section describes the method used when operating the commnad dial in combination with other buttons.
This method is used for the following functions.
•Manual exposure (page 57)
•Metering mode (page 58)
•Exposure adjustment (page 59)
•Exposure Bracket (page 63)
•Flash mode (page 68)
•White balance (page 73)
•Burst (page 75)
•Multi Burst (page 76)
•Nightshot/Nightframing (page 77)
Command dial
WB
Mode dial
/BRK
NIGHTSHOT/NIGHTFRAMING
aSet the mode dial to P, S, A, M, SCN or .
bPress and hold the button you want to operate and turn the command dial.
The value or setting that is indicated on the screen is entered.
cRelease the button.
The indicators disappears from the screen.
48