Protecting images

– Protect

Mode dial:

To prevent accidental erasure of an important image, you can protect it.

Multi-selector (v/V/b/B)

MENU

Mode dial

/

•Note that formatting the recording medium erases all the data in the recording medium even if images are protected, and these images cannot be recovered.

•It may take some time to protect the images.

On the single screen

aSet the mode dial to .

bDisplay the image you want to protect with b/B.

cPress MENU.

The menu appears.

dSelect - (Protect) with b/B, then press the center of the multi-selector.

The image currently being displayed is now protected, and the - (Protect) mark is indicated on the screen.

80min

VGA

 

101 2/9

Protect

Exit

BACK/NEXT

eTo protect other images, display the image you want to protect with b/B, then press the center of the multi- selector.

To cancel the protection

In Step 4or 5, press the center of the multi-selector again. The - mark disappears.

Still image editing

On the Index screen

aSet the mode dial to , press / (index) to switch to the Index screen.

bPress MENU.

The menu appears.

cSelect - (Protect) with b/B, then press the center of the multi-selector.

dSelect [Select] with b/B, then press the center of the multi- selector.

e Select the image you want to

 

protect with v/V/b/B, then

 

 

press the center of the multi-

 

Still

selector.

The green - (Protect) mark is

image

indicated on the selected image.

 

 

 

 

 

editing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SELECT MENU TONEXT

fTo protect other images,

repeat Step 5.

89