Using the AC Adaptor
Using your camera abroad
Jack cover
DC plug
1 | AC Adaptor |
,Open the jack cover, then connect the AC Adaptor (supplied) to the DC IN jack of the camera.
Open the jack cover in the arrow direction as illustrated above. Connect the plug with the v mark facing up.
•Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).
2To a wall outlet (wall socket)
Power cord (mains lead)
1
2
,Connect the power cord (mains lead) to the AC Adaptor and to a wall outlet (wall socket).
•When you have finished using the AC Adaptor, disconnect it from the DC IN jack of the camera and the wall outlet (wall socket).
•The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket), even if the unit itself has been turned off.
Power sources
You can use your camera in any country or region with the supplied AC Adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].
•Do not use an electrical transformer (travel converter), as this may cause a malfunction.
started Getting
17