Symptom

Cause

 

Solution

You cannot print images.

• The camera does not connect to the printer.

p Check that the camera and the printer are properly connected

 

 

 

using the USB cable.

 

• The printer is not turned on.

p Turn on the printer. For further information, refer to the

 

 

 

operating instructions supplied with it.

 

• Movies and images recorded in RAW mode

—

 

cannot be printed.

 

 

 

• Images modified with a computer or images shot

—

 

using other than this camera may not be able to

 

 

be printed.

 

 

 

 

 

Printing is canceled.

• You disconnected the USB cable before the

—

 

(Not disconnect USB cable) mark

 

 

disappears.

 

 

 

• You switched the

/CF switch while

—

 

printing.

 

 

 

 

 

You cannot insert the date

• The printer does not provide these functions.

p Consult with the printer manufacturer whether the printer

or print images in the

 

 

provides these function or not.

index mode.

• The date may not be inserted in the index mode

p Consult with the printer manufacturer.

 

depending on the printer.

 

 

 

 

“---- -- --”is printed on the

• The recording date data is not recorded on the

p The images that do not have the recording date data cannot be

date-inserted part.

image.

 

printed with the date inserted. Set [Date] to [Off] and print it.

 

 

 

 

Others

 

Symptom

Cause

Solution

 

The camera does not

• You are not using an “InfoLITHIUM” battery

p Use an “InfoLITHIUM” battery pack (page 146).

 

work, no operations can

pack.

 

 

be performed.

• The battery level is low or zero (The

p Charge the battery pack (page 14).

 

 

indicator appears.).

 

 

 

• The AC Adaptor is not connected securely.

p Connect it securely to the DC IN jack of the camera and to a wall

 

 

 

outlet (wall socket) (page 17).

 

 

 

 

 

The power is on, but the

• The internal system is not working properly.

p Remove, and then, after one minute, reinstall the battery pack

 

camera does not work.

 

and turn on the camera. If this does not work, press the RESET

 

 

 

button located inside the battery/“Memory Stick” cover with a

 

 

 

pointed object, then turn the power on again. (This will clear the

128

 

 

date and time settings, etc.)