Command dial
Shutter button
Mode dial
aSet the mode dial to M.
bSelect a shutter speed with the command dial.
80min | 8M FINE 101 |
M98
| 200 |
|
S | 250 |
|
| 320 |
|
| MAF | F2.0 0EV |
cPress and hold (exposure) and select an aperture value with the command dial.
80min | 8M FINE 101 |
M98
2.0
F2.2
2.5
MAF 2500EV
dShoot the image.
•If the proper exposure is not obtained after making the settings, the setting value indicators on the screen flashes when the shutter button is pressed halfway down. You can shoot in this condition, but we recommend that you adjust the flashing values again.
•The flash is set to (Forced flash) or (No flash).
Selecting the metering mode
Mode dial: P/S/A/M/SCN/
You can select a metering mode to determine the exposure, depending on what part of the subject is used to measure.
The image is slipt up into multiple zones, each of which are evaluated individually. The camera calculates the
The default setting is
Metering is performed with priority given to the center of the image. The camera determines the exposure based on the brightness of a subject near the center.
58