E
LINE IN | LINEOUT | DIGITAL IN/OUT | ||
|
| COAXIAL | OPTICAL | |
L | L | IN | IN | OUT |
R | R |
|
|
|
1 2 | 3 | 4 |
Location and Function of Controls
Rear Panel Jacks ‰1LINE IN (line input) jacks (phono jack) Connect to the recording outputs of an amplifier. Signals supplied by the amplifier can be recorded using the sampling frequency of 48 kHz in the standard play mode or 32 kHz in the long play mode.
2LINE OUT (line output) jacks (phono jack)
Connect to the DAT or tape inputs of an amplifier. The playback signal of this deck will be output.
3COAXIAL/OPTICAL DIGITAL IN (digital input) jacks (coaxial phono jack/optical jack)
Connect to the digital outputs of an amplifier having a
4OPTICAL DIGITAL OUT (digital output) jack (optical jack)
Connect to the digital inputs of an amplifier having a
•Use the connecting cords specified in the illustrations.
•Turn off the power for all equipments before making connections.
•Be sure to insert the plugs firmly into the jacks. Loose connections may cause hum and noise. When unplugging, grasp the plug and not the cord.
Note on sound signalsWhen connecting an optical cable to the DIGITAL IN/DIGITAL OUT jacks, sound signals (L/R) are transmitted together through the cable.
14