B
A) A) A)
B)
C
A) A) A)
B)
D
A) A) A)
B) C) D)
E
1)
A)A)
B)C)
Sub Codes
Start ID ıThis signal indicates the start of a music selection. You can locate the position of the start ID precisely. This signal should be written at the beginning of the selection. A)Selection
B)Start ID
Program number ÇThis signal gives a number to selection. You can record it where the start ID is written. By designating this number, you can choose the desired selection directly or program selections in a desired order. A)Selection
B)Program number
Skip ID ÎThis signal can be marked on the selection wherever you wish. When the SKIP indicator is lit during playback, the deck will skip at high speed from where the skip ID is marked to the next start ID, and then playback will start again. Record this skip ID at the beginning of portion you want to skip.
A)Selection
B)Skip ID
C)Skip to the next start ID. D)Start ID
End ID ‰This signal indicates the end position of a recording.
1)
When you do not want to listen to the very end of a tape, record the end ID at the beginning of the portion you do not want to play. When the end ID is detected during playback, playback stops and the tape is rewound to the beginning automatically. A)Selection
B)When the end ID is detected, during playback, the tape is automatically rewound to the beginning.
C)End ID
28