A
|
|
|
| Should not light. | Margin | |
– dB | 60 40 30 20 12 8 | 6 | 4 | 2 | 0 OVER | MARGIN |
L |
|
|
|
|
|
|
R |
|
|
|
|
| dB |
| Peak level |
|
|
|
|
REC LEVEL
L R
| 5 |
4 | 6 |
3 | 7 |
2 | 8 |
1 | 9 |
0 | 10 |
Recording
If the unit is left in the
The
If the cable is disconnected or the program source is intermitted, the digital input signal will be interrupted during digital recording
The OPTICAL and 8or COAXIAL and 8 indicators flash and the unit will enter
The peak level meters have a peak hold function which indicates the peak level of the analog input signal momentarily. The MARGIN indicator shows how much margin there is between the peak level of the input audio signal and 0 dB. Whenever a signal having a higher level than the displayed one is input, the new level replaces the lower one on the MARGIN indicator.
Turn the REC LEVEL controls so that the “OVER” segments do not light, even at the highest level.
To reset the marginPress the MARGIN RESET button. The margin will become “-
The “OVER” segments light in red, and “0.0 dB” flashes.
If “OVER” lights steadily, lower the recording level so that the peak level meter lights between
If you keep adjusting the recording level with the unit in the record- pause mode
If the unit is left in the
The levels of the input audio signals appear even in the stop mode, and you can continue to adjust the recording level. (The
In the above case, press the ¶REC button again to set the unit to
23