12
)
7 | £ 8 | $ › 1 ¡ | • | ¶ |
1
AUTO
START ID
2
RENUMBER
START ID
Program
Numbers
RenumberingIf you record from the beginning to the middle of a tape on which another recording has ever been applied, the same program number may be written twice on that tape.
If you omit designating the next program number when recording from the middle of the tape, the succeeding program numbers are not written.
In such cases, with the renumbering function, you can renumber the program numbers from the beginning of the tape at a high speed.
Renumbering Program Numbers Automatically1 Make sure that the AUTO indicator is lit, and that the safety tab of the cassette is at the
If the AUTO indicator is not lit, press the START ID AUTO button.
2 Press the RENUMBER button during playback or in the stop mode.
The tape will automatically be rewound to the beginning, and the program numbers are
While the program numbers are rewritten, the START ID indicator flashes and while the tape is fast- forwarded to the next start ID, the AUTO RENUMBER indicator flashes. When program numbers are written correctly, the tape is
The tape is automatically rewound to the beginning, and the deck enters stop mode.
Note
The renumbering function may not work correctly in the following cases:
•A blank section is left on the tape.
•The beginning of the new tape is advanced with the ¡or 3button.
36