Turn on the timer.

4 2

)

7

£

8

$ › 1 ¡

•

To the AC outlet

«

Amplifier

To the AC outlet

«

Timer

1, 3

4

REC OFF PLAY

TIMER

Timer Activated Operation

Use a commercially available audio timer to activate recording or playback at a desired time.

Read the operating instructions for the timer and the amplifier.

Timer Activated Recording

1

2 Turn on the DAT deck, and prepare for recording. (Follow steps of "recording" on page 21.)

3 Set the timer to the desired time.

Power to the amplifier and to the DAT deck is turned off. Leave the power switches of the equipment turned on.

4 Set TIMER to REC.

At the preset time, the power is supplied and recording starts after about 4 seconds.

The AUTO indicator will be the same as the one before the power of the DAT deck is turned off.

When the AUTO indicator lights, start IDs will be written during recording.

When timer activated recording is finished

Be sure to set the TIMER switch to the OFF position.

Precautions

•If the TIMER switch is left at the REC position, recording will start when the power is turned on the next time, and the tape contents will be erased.

•In timer recording (the TIMER switch is set to the REC position), the auto rewind function will not be activated even if the tape is fully taken up. The tape stops without being rewound so that recording will not be performed over the previously recorded material.

•Be sure to activate timer recording with the cassette inserted properly in the cassette compartment. With the cassette compartment lid opened, timer recording will not function.

51