12
)
7 | £ 8 | $ › 1 ¡ | • | ¶ |
1
AUTO | START ID |
| |
START ID |
|
2 | START ID |
SHIFT | |
RENUMBER | RENUMBER |
| |
START ID | SKIP ID |
| END ID |
Program
Numbers
Shifting Start IDs’ and Program Numbers PositionThe start ID position may not coincide exactly to the beginning of the selection, especially when the portion between selections is not clear. On such a tape, the very beginning of the selection cannot be located using the AMS function. If this happens, you can shift the start ID and program number position, however, you cannot shift the position of the program number 1.
1 Make sure that the AUTO indicator is off, and that the safety tab of the cassette is at the
If the AUTO indicator is lit, press the START ID AUTO button to turn off the indicator.
2 Press the RENUMBER button during playback or in the stop mode.
The start ID and program number position of the 2nd selection and the succeeding selections, will be shifted toward the head of the tape by about 0.3 of a second.
When program numbers are written incorrectly, the renumber function operates.
Erasing
Make sure that the safety tab of the cassette is closed.
During playback, press the START ID ERASE button while the program number to be erased appears on the display.
That program number is erased. The start ID at the same position will also be erased. The ERASE indicator flashes while the program number is being searched for, and the START ID indicator flashes while the program number is being erased.
When the program number is erasedPlayback continues. The succeeding program numbers remain unchanged. To
37