)

7

£ 8

$ › 1 ¡

•

¡ •

1 ¡

Lights

PGM NO.

AMS

M

S 48 KHZ

C

AAAB

5 5

D

C

Recording

End Search

If the previous recording was applied to the middle of the tape, you must locate exactly the last point of the recorded area, and start the new recording from this point. This will prevent leaving a blank section on the tape.

If you want space between the last recording and the new recording, use the

•REC MUTE button to mute the sound.

Press ¡.

The last point of the previous recording (the beginning of the blank section or the beginning of the end ID*) is located, and the tape stops. When the end ID is detected, the "EE" indicator lights at the PGM. NO display.

When new recording is made from the position where the end ID is written, the end ID is erased automatically.

Note

If the point where you pressed the ¡ button is blank, the end search operation will not function.

When the end ID is written before a blank section Ç

The end search operation stops at the beginning of this end ID as described in Fig Ç.

A)Selection

B)Blank

C)The position at which the end ID stops. D)End ID

Note on the duration of a blank section

The blank section must last for more than 9 seconds for the end search operation to function correctly.

With the new cassette tape which no recording is made, the tape will advance to the end.

26