Sony DTC-690 a)b), c)c), WRITE, WRITE, d) e), START ID, START ID, f)0.3 sec, d)Each time you press, e)Each time you press ¡, button or forward with the

1, 3

)

7 £ 8 $ › 1 ¡ • ¶

1 2

1

3	WRITE
\	START ID

2

1¡

3

START ID

WRITE	START ID
		WRITE
START ID		SKIP ID
	REHEARSAL
	S	END ID

a)

A

a)b)

￿

c)c)d) e)

f)

f)

Start ID

Writing Manually during Playback (Rehearsal Function)

During playback, start ID can be written at the desired position more accurately than during recording.

Make sure that the safety tab of the cassette is closed.

1 Press the 3button to start playback. At the desired position, press the START ID WRITE button. The REHEARSAL indicator lights and the WRITE and START ID indicators flash, and the position for 3 seconds from the point where you pressed the START ID WRITE button is played back repeatedly (rehearsal function). The beginning of the repeated portion will be the beginning of the start ID.

2 Press the 1or ¡ button to adjust the “repeat start” point. The “repeat start” point is shifted backward with the 1button or forward with the ¡button by about 0.3 of a second.

The indicator at the MARGIN display shows how much the “repeat start” point is shifted from the point where you pressed the START ID WRITE button.

3 After setting the beginning of the start ID at the desired point, press the START ID WRITE button again.

The WRITE indicator lights steadily and the start ID is written. The program number is not written in this time.

a) When you pressed ¡twice.Note on the point where a start ID is written Å

During the rehearsal function, a start ID is written at the beginning of the repeated portion as illustrated.

a) Point where you pressed START ID WRITEb)Repeated portion (for 3 seconds) c) Selectiond)Each time you press 1e)Each time you press ¡f)0.3 sec.Normally, the repeated portion is played back 5 times.

When the 1or ¡button is pressed while the repeated portion is played back, the repeated portion is played back up to 8 times max, and then the tape stops.

32