A | a) b) |
c)c)
e) d)
f)
g)
g)
h)
2
)
7 | £ | 8 | $ › 1 ¡ | • | ¶ |
1
1 | 1 ¡ |
2
ERASE
END ID
End ID
Note on the point where an end ID is written ÅDuring rehearsal function, an end ID is written at the end of the repeated portion as illustrated.
a) Repeated portion
b)Point where you pressed END ID WRITE
c)Selection d)3 seconds
e)End ID (9 seconds)
f)Each time you press ¡ g)0.3 sec.
h)Each time you press 1
Normally, the repeated portion is played back 5 times.
When the 1or ¡button is pressed while the repeated portion is played back, the repeated portion is played back up to 8 times, and then tape stops.
Note
When recording is finished in the middle of a tape, be sure to write the end ID at the end of the last selection.
Erasing
Make sure that the safety tab of the cassette is closed.
1 Search for the beginning of the end ID with the ¡button. (Page 26.)When the end ID is detected, the "EE" indicator lights.
2 Press the END ID ERASE button.The END ID ERASE indicator lights while the end ID is being searched for and then goes off when the end ID is erased.
Note
When recording from the point where the end ID is written, the end ID is erased automatically.
42