A
ABS TIME
a)
M S
COUNTER MODE
|
| REMAINING |
|
| b) |
H | M | S |
COUNTER MODE
c)
M S
Playback
Display Window ÅEach time you press COUNTER MODE, the counter changes as follows.
a) Absolute time
b)Remaining time to the end of the whole tape (not to the end of the recorded portion)*
c) Linear counter (tape running time)
*When playing back a
Notes
•At the beginning of the tape, “” may appear and immediately go off at the PGM NO. indicator position depending on some types of
•To reset the counter to 0M 00S, press COUNTER RESET on the remote commander.
Remaining time does not appear in the following cases•Immediately after the deck is set in the playback mode.
The remaining time will appear about 16 seconds (in the
•When playback is started from a blank section (page 19), the remaining time may not appear. Press the 1or 4 button.
Accuracy of the indicator for the remaining timeThis unit indicates the remaining time by referring the thickness of the tape. So the remaining time may differ from the actual remaining time according to the type of tape.
44