1

)

7

£ 8

$ › 1 ¡

•

 

 

22

1

AUTO

START ID

2

\

3

8

 

REC

 

PAUSE

Start ID

The start ID indicates the beginning of each selection.

You can start playback from the start ID position. (Page 28.)

There are three ways to write start ID:

•Writing automatically during recording

•Writing manually at the desired position during recording

•Writing manually at the desired position during playback

Note

While the start ID is being written, all buttons except the 7button are not operative.

Writing Automatically during Recording

1 Make sure that the AUTO indicator is lit. If it is not, press the START ID AUTO button.

When turning on the power and inserting a cassette with its safety tab at the record-possible position, the AUTO indicator lights automatically. In timer recording, this indicator will be the same as the one before the power is turned off. Start IDs will be recorded automatically when the AUTO indicator lights.

2 To start recording, press the REC button, then press the 8PAUSE or

3(play) button.

When the non-signal level lasts for more than 3 seconds and a selection then starts, the start ID is written automatically for 9 seconds (18 seconds in the long-play mode). The program number is also written simultaneously. (Page 34.)

While a start ID is being written, the START ID indicator flashes on the display.

30