1
)
7 | £ | 8 | $ › 1 ¡ | • | ¶ |
|
|
|
2 3
1 | REC | OFF | PLAY |
|
| POWER | |
|
|
| TIMER \ |
2 | OPEN/CLOSE | |
) | ||
|
3
3
Playback
1 Make sure that the TIMER switch is set to the OFF position, and then turn on the power.
2 Insert the cassette and press the
0OPEN/CLOSE button to load the cassette.
3 Press the 3(play) button.
Playback begins.
If an end ID is written on the tape or a blank section of more than 9 seconds is detected, playback stops automatically at the end ID position, and the tape will be rewound to the beginning.
To stop playbackPress the 7button.
To stop playback for a momentPress the 8PAUSE button.
To release pause and restart playbackPress the 8PAUSE or 3(play) button.
To remove the cassette
Press the 0OPEN/CLOSE button.
To rewind orStop the tape and press the 1or ¡ button.
To advance the tape (cue) with hearing the tape sound*Press the ¡ button during playback.
To rewind the tape (review) with hearing the tape sound*Press the 1button during playback.
*Sound is heard while the button is pressed. Release the button at the desired point. Playback resumes.
The speed of the tape increases about 4 seconds after the cue or review starts.
On the volume adjustmentCompared with the analog audio cassette tape, a digital audio tape contains less tape hiss noise. So be sure to turn down the volume before playback.
Adjusting the headphones volumeUse the LEVEL control.
When the tape is played back to its endThe tape will be rewound to the beginning and stop automatically.
If tape noise exists, or sound quality has deterioratedThe head may be contaminated. Clean the head, using a cleaning cassette (See page 53).
43