1

)

7

£ 8

$ › 1 ¡

•

 

 

22

Program

Numbers

Program numbers are the codes indicating the selection order. (Page 28.)

There are two ways to write program numbers:

•Writing automatically during recording

•Renumbering automatically during playback or in the stop mode (Renumbering function)

Writing Automatically during Recording

1

AUTO

When you proceed so that start IDs are written automatically during recording, the program numbers are also written.

START ID

2

\

3

8

 

PAUSE

 

REC

 

Writing program numbers from the beginning of the tape

1 Make sure that the AUTO indicator is lit. If it is not lit, press the START ID AUTO button.

When turning on the power and inserting a cassette with its safety tab at the record-possible position, the AUTO indicator lights. In timer recording, the AUTO indicator will be the same as the one before the power is turned off.

2 To start recording, press the REC button, then press the 8PAUSE or

3(play) button.

The program numbers will be written in numerical order from “1” at the same position as the start IDs.

The START ID indicator flashes while the start ID is written for about 9 seconds (18 seconds in the long-play mode).

34