START ID ERASE
)
7 | £ 8 | $ › 1 ¡ | • | ¶ |
Start ID
Adjusting the Position
The position of a start ID written during recording or by using the rehearsal function can be finely adjusted.
You can shift the start ID position about 2 seconds (about 4 seconds in the
ERASE
START ID
START ID
1During playback, press the START ID WRITE button where the start ID to be shifted is written.
2Perform steps 2 and 3 described, “Writing Manually during Playback.”
START ID
ERASE
Erasing
While the start ID you want to erase appears on the display during playback or in the stop mode, press the START ID ERASE button.
Make sure that the safety tab of the cassette is closed.
That start ID is erased.
The ERASE indicator flashes while the start ID is detected. While the start ID is being erased, the ERASE indicator lights and the START ID indicator flashes.
If you press the START ID ERASE button during the stop mode or while the START ID indicator is not on the display
The start ID just before the current position is erased.
When a start ID is erased
If a program number is also written with the start ID, the program number will be erased as well at the same time and the succeeding program number remain unchanged. In this case,
33