Sony DTC-690 CLEAR, CHECK2, To stop RMS play, To cancel the entire program, To add a selection to the program, To check the programmed selections

1

CLEAR

CHECK 2

7 4

1	1	2	3
	4	5	6	PGM NO	AMS
	7	8	9

0

a)

2 ENTER STEP

RMS

a)b)

4

3

Various Playback

Operations

Random Music Sensor (RMS) Operation

The RMS function allows you to program the desired selections in the desired order. For the operation, program numbers must be written on the tape.

This operation can be performed only with the remote commander.

1 Designate the desired selection by pressing the numeric button(s) in the stop mode.

The selection numbers can be specified from 1 to 99.

a) Lights

2 Press the ENTER button.

a)Indicates the playing order. b)The RMS indicator lights after

programming the first selection.

3 Repeat step 1 and 2.

A maximum of 60 selections can be programmed.

4 Press the 3(play) button.

The programmed selections are played back in the designated order.

To stop RMS play

Press the 7button.

To check the programmed selections

Press the CHECK button on the remote commander. Each time you press the CHECK button, the programmed selections appear in the designated order.

To add a selection to the program

Once the RMS play starts, you cannot add a selection. To add a selection, first stop the RMS play, and program new selection(s) by following the procedure described above.

To delete the selection you programmed last

Press the CLEAR button.

However, when checking the programmed selection, the CLEAR button cannot be used.

To cancel the entire program

In the stop mode: Press the 7button once.

In the RMS play mode: Press the 7button twice.

The program is also erased when the power is turned off.

50