Sony DTC-690 After you write an end ID, 2 Press the END ID WRITE button, 1 Press the 8PAUSE or •REC MUTE button to stop recording

2

	)
	7 £	8	$ ›	1 ¡ • ¶
	3 1, 3			1
1	8			•
	PAUSE		REC MUTE

2	START ID
	WRITE

END ID

SKIP ID

END ID

WRITE

3	8	3
	PAUSE

PGM NO.

End ID

The end ID indicates the last position of the recording or playback. While recording on the same tape has been done several times, you can locate the point where the previous recording terminates quickly by using the end ID.

When the end ID is detected during playback, the playback stops and the tape is rewound to the beginning automatically.

Writing during Recording

1 Press the 8PAUSE or •REC MUTE button to stop recording.

When pressing the 8PAUSE button: The deck enters the record-pause mode.

When pressing the •REC MUTE button: The deck enters the record-

pause mode after a sound muted portion is created for 4 seconds.

2 Press the END ID WRITE button.

The END ID WRITE indicator lights.

3 Press the 8PAUSE or 3(play) button to release the record-pause mode.

The "EE" indicator appears on the display.

The end ID is written for about 9 seconds (18 seconds in the long-play mode). Tape returns to the beginning of the end ID after the end ID is written.

After you write an end ID

The portion after the end ID position cannot be played back. (The "EE" indicator appears at the PGM NO. display.)

Erase the end ID (page 42) where you want to play back the portion after the end ID position.

40