A

L L

R

R

LINE OUT

LINE IN

B

COAXIAL

 

 

 

 

 

 

COAXIAL IN

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

OPTICAL OUT

 

 

 

 

 

 

 

 

 

OPTICAL IN

 

 

 

 

 

 

 

 

 

 

 

 

 

D

]

Connections

Connecting Cords

There are following three types of connecting jacks at the rear of the deck. Each type of jack requires a different type of connecting cord.

For LINE IN/OUT (analog input/ output) jacks Å

Use the supplied or an optional audio signal connecting cord such as RK- C710HS, RK-C715HS, RK-C910ES, RK- C915ES etc.

Note

Red plugs and jacks are for the right channel (R) and white ones for the left channel (L).

For COAXIAL IN (digital input) jacks

ı

Use an optional coaxial connecting cord such as VMC-1ES, VMC-10ES etc.

For OPTICAL IN/OUT (optical transmission digital input/output) jacks Ç

Use an optional optical cable such as POC-15, POC-10HS etc.

How to connect the optical cable Î

Remove the cap and plug it in firmly.

Notes on the optical cable

•Do not bend the cord. When the cord is not used, curl it

with a diameter of more than 15 cm (5 7/8 inches).

•Do not use it under high temperatures.

•When the optical cable is not connected, cover the OPTICAL IN/OUT jacks with the supplied caps.

15