1, 3

)

7

£ 8

$ › 1 ¡

•

2

1

WRITE

SKIP ID

2

1 ¡

3

 

START ID

WRITE

 

SKIP ID

REHEARSAL

WRITE

SKIP ID

S

END ID

 

 

a)

Skip ID

The skip ID indicates the beginning of the portion to be skipped.

When the skip ID is detected during playback, the tape skips to the next start ID position, and the normal playback resumes. (SKIP play) (Page 28.)

You can write the skip ID during recording or write more accurately during playback.

Writing during Recording

Press the SKIP ID WRITE button at the beginning of the portion you want to skip later.

The SKIP ID and WRITE indicators light momentarily.

The skip ID is written for about 1 second (2 seconds in the long-play mode) from where you pressed the button.

Writing during Playback (Rehearsal Function)

During playback, skip ID can be written at the desired position more accurately than during recording. Make sure that the safety tab of the cassette is closed.

1 During playback, press the SKIP ID WRITE button at the desired position.

The REHEARSAL indicator lights and the WRITE indicator flashes, and the portion for 3 seconds to the point where you pressed the SKIP ID WRITE button, is played back repeatedly (rehearsal function).

The end of the repeated portion will be the beginning of the skip ID.

2 Press the 1or ¡button to adjust the “repeat end” point. The “repeat end” point shifted backward with the 1button or forward with the ¡button by 0.3 of a second.

The indicator at the MARGIN shows how much the “repeat end” point is shifted from the point where you pressed SKIP ID WRITE.

a) When you pressed 1twice.

3 After setting the beginning of the skip ID at the desired point, press the SKIP ID WRITE button again.

The SKIP ID indicator lights, and the skip ID is written.

38