1

2

1

MUSIC

MUSIC SCAN

 

SCAN

 

MARGIN

S

23

Various Playback

Operations

Music Scan

With the this function, you can listen to the first part of each selection.

You can designate the scan time up to 15 seconds in steps of a second. The scan time is 8 seconds if the scan time is not desingated. (The designated time remains memorized even if you turn off the unit.) For this operation, the start ID codes must be written on the tape. For how to write the start ID codes, see page 30.

This operation can be performed only with the remote commander.

1 In the stop mode*, press the MUSIC SCAN button.

The MUSIC SCAN indicator flashes and the designated scan time is indicated at the MARGIN display.

To designate the scan time, press the

1or ¡button while the scan time is indicated at the MARGIN display.

2 Press the 3(play) button.

The tape is rewound to the beginning, the first part of each selection (start ID position) is played back for the time you designated sequentially.

The 3and START ID indicators light during playback.

When you press the 4/¢button instead of the 3 (play) button

The nearest start ID before/after the current position is detected and, after playing back the first part of that selection for the time you designated, the next start ID in the reverse/ forward direction is located.

This operation continues until the end of the tape.

*When the MUSIC SCAN is pressed during playback, the tape is rewound to the beginning and the music scan starts automatically.

47