Overview

Use this connector to control this unit by connecting it to equipment such as an external equipment which supports the RS-232C interface.

0 DV IN (i.LINK) connector (6-pin)This connector inputs digital video signals conforming to the i.LINK protocol.

Also, this connector is used to control this unit by connecting it to equipment such as an external equipment which supports i.LINK.

qa USB connector

This connector is used to control this unit by connecting it to equipment such as an external equipment which supports a USB interface. This connector is USB 2.0 which supports Full- speed USB (12Mbps).

qs Equipotential ground terminal connector This connector is used to connect to the equipotential plug to bring the various parts of the system to the same potential.

See “Important safeguards/notices for use in the medical environments” on page 2.

qd -AC IN connector

Use power cord suitable for your local power supply (not supplied).

See “WARNING on power connection” and “WARNING on power connection for medical use” on page 2.

12 Location and Function of Parts