Recording

To use the SVRM-100A remote control unit Press the MARK button on the SVRM-100A remote control unit (not supplied).

For detailed information on how to mark indexes, see “Marking Indexes” on page 58.

To mark indexes automatically

Indexes are automatically marked every five minutes when the AUTO INDEX (see page 47) sub menu of the SETUP MENU is set to ON.

Note

You can mark up to 254 indexes on one disc and up to 99 indexes within one title.

When the number of indexes exceed the above limitation, an alarm message appears.

For detailed information on alarm messages, see “Alarm Messages” on page 52.

To make new titles automatically

The AUTO TITLE sub menu of the SETUP MENU allows you to make a new title when the number of indexes in one title exceeds 99.

For details, see “AUTO TITLE” on page 47.

Segment between the indexes

The segment between the indexes is called a chapter.

 

Title 1

 

Title 2

 

Title 3

 

 

 

 

 

 

Chapter1

Chapter 2

Chapter 3

Chapter1

Chapter 2

Chapter1

 

 

 

 

 

 

 

 

 

 

 

 

Indexes

Using a Foot Switch

A foot switch (not supplied) allows you to start or pause recording.

The operation required for starting or pausing the recording depends on the setting of the FOOT SW sub menu of the SETUP MENU.

Note

To stop recording when using a foot switch, press the xSTOP button on the front panel of the unit.

1 Press the MENU button.

The TOP menu appears.

2 Select “SETUP MENU” by pressing the V or v button and press the b button with “SETUP MENU” highlighted.

The SETUP MENU appears.

3 Select “FOOT SW” by pressing the V or v button.

4 Press the b button.

The FOOT SW sub menu appears.

28 Recording