Manuals / Brands / TV and Video / DVD Recorder / Sony / TV and Video / DVD Recorder

Sony DVO-1000MD 3,5 2,4, When there are more sub menus under the currently displayed menu

1 62

Download 62 pages, 1.41 Mb

Basic Menu Operations

This section describes the basic menu operations which are common to each display.

This manual describes some menu operations elsewhere. Read those sections too.

2 Select the desired basic menu by pressing the V or

vbutton.

The selected sub menu is highlighted.

6 1

3 Press the b button.

The next lower sub menu display appears.

3,5 2,4

1 Press the MENU button.

The TOP menu appears.

The item selected is highlighted.

When there are more sub menus under the currently displayed menu

Access the desired menu display by repeating steps 2 and 3.

The item selected during the last menu operation using that screen is highlighted.

50 Basic Menu Operations

Contents

Page Owner's Record WARNING Symbols on the products Important safeguards/notices for use in the medical environments WARNING on power connection Caution For the customers in the U.S.A For the customers in Canada Overview Recording Playback Editing Menu On safety On operation and storage location Operate the unit in a horizontal position Avoid violent impacts Do not obstruct ventilation openings Page Overview Rewritable DVD+RW 1) disc as the recording media High-qualityand long recording Recording indexes High-qualityaudio recording Front Panel 6Front panel display ADisc indicator Recording mode indicator CINPUT signal indicator DDolby indicator UP: C BPLAY button D >NEXT/DOWN button NEXT: DOWN: Rear Panel DV IN (i.LINK) connector (6-pin) qa USB connector Equipotential ground terminal connector qd -ACIN connector Connecting External Equipment (1) Connecting External Equipment (2) Turning the Power On Turning the Power Off Selecting Either NTSC or PAL Video Signal System Page Setting the Date and Time To move the cursor between the date column and the time column Front panel display during menu operation To cancel the date/time setting without changing any values Selecting the Remote Interface Page Recording Notes on Handling Loading and Unloading Discs Loading a disc Unloading a disc Selecting Input Signals Selecting the Recording Mode Recording Titles If buttons on the front panel do not function even if you push them Marking Indexes During Recording Using a Foot Switch Adding Information to Titles Pre Rec Function When the Disc Becomes Full During Recording Page Page To quit formatting a disc Playback Playback a Disc Fast Forward or Reverse Playback Adding Indexes During Playback Jumping to a Desired Title Jumping to a Desired Chapter Repeat Playback Between Two Points (A-BRepeat) Setting points A and B Stopping repeat playback between points A and B Conducting repeat playback of the existing points A and B Repeat Playback of a Chapter Repeat Playback of a Title To stop repeat playback of the title When there are plural pages Displaying the next page Viewing frozen pictures using buttons on the unit When the unit is controlled using the SVRM-100Aremote control unit Editing Verifying/Editing Information About the Title Protecting a Title Erasing a Title Page Menu Menu Configuration Menu List REPEAT FUNCTION menu DISC INFORMATION menu SETUP MENU ENHANCED MENU - Enhanced Sub Menu ENHANCED MENU sub menu 3,5 2,4 When there are more sub menus under the currently displayed menu To return to a higher level Example: “ANALOG” is selected as the input signal on the following screen When the following screen appears during a menu operation When you highlight “ESC” and press the SET button: When you highlight “EXEC” and press the SET button: Error Messages Alarm Messages Page Page Page General Input/Output Connectors Control Signals Others Location and Function of Parts Marking Indexes Cuing a Particular Image by Specifying an Index Number - Index Search Searching for a Particular Image - Index Scanning Erasing an Index Page Bit rate Chapter Finalize Index Mbps