Example

v

To return to a higher level

Press the B button. Whenever you press the B button, the screen returns to the menu one level up.

4 When the screen with an item you want to set or change is displayed, select the desired setting by pressing the V or v button.

When you move the cursor to the setting, the setting is highlighted and selected.

Example: “ANALOG” is selected as the input signal on the following screen.

To continue the settings, go to step 5.

To end the menu operation, go to step 6.

5 Access the desired sub menu by pressing the B, b,

Vor v buttons, and repeat step 4.

When you have completed all of settings using the menu, go to step 6.

6 Press the SET button.

The following screen appears, and the unit starts saving the settings made.

When saving is completed, the message disappears, and the unit returns to the normal display.

When the following screen appears during a menu operationWhen you highlight “ESC” and press the SET button:

The unit returns to the menu display one level higher than the current one without executing the setting.

When you highlight “EXEC” and press the SET button:

The confirmation message “READY?” appears. Press the SET button again.

The message related to the current operation appears, and the unit completes that operation. When saving is completed, the message disappears, and the unit returns to the normal display.

To cancel the menu operation

Push the MENU button in any menu layer before pushing the SET button.

The message “ABORT!” appears, and all of the changed settings are cancelled.

The unit returns to the normal screen.

Menu

Basic Menu Operations

51