Recording
The message “NOW SAVING...” appears and the unit starts to save the setting.
When the saving is completed, the message disappears and the unit returns to the normal display.
The recording mode is executed.
Recording
The unit allows you to record up to 49 titles on one disc. Also, you can mark indexes at desired points during recording.
When you record additional data on an already recorded disc, the unit starts from the beginning of the blank portion of the disc.
Notes
•If you load a disc which is full, a disc on which 49 titles have already been recorded, and so on, you cannot record any data. Be sure to confirm the disc before using it.
•When the remaining time of the disc becomes five minutes, the main display section of the front panel display (TITLE/CHAP/time indicator) blinks.
•Before performing the important recording, be sure to try to record whether or not the unit records correctly.
Recording Titles
1 | 3 | 2,4 |
65
1Press the 1 (power) switch to turn the power on.
The message “Welcome” appears on the front panel.
When the message changes to “Now loading...,” and then to “NO DISC!,” go to the next operation.
Note
If the power is not turned on and the front panel display does not light even if you press the 1 (power) switch, check whether the MAIN POWER switch on the rear panel is set to the ] (on) side.
26 Recording