Miscellaneous
Message |
| Cause and remedies |
|
|
|
Monitor screen | Front panel display |
|
|
|
|
CANNOT RECORD THIS SIGNAL. | Can't REC! | You tried to record prohibited signals. This message is |
|
| displayed for about five seconds, and then the display |
|
| returns to normal. |
|
| tInput compatible signals. |
|
|
|
PLAYBACK PROHIBITED BY REGION | REGION CODE! | You tried to play a disc with a region code that is different |
CODE. |
| from that of the unit. The message disappears when the |
|
| disc tray is opened. |
|
| tSet the region code of the unit to the same as that of |
|
| the disc using the REGION CODE sub menu of the |
|
| SETUP MENU. |
|
|
|
KEY INHIBIT MODE IS SELECTED. | KEY INHIBIT! | The key lock function is set. This message is displayed |
SET KEY INHIBIT MODE TO OFF. |
| for about five seconds, and then the display returns to |
|
| normal. |
|
| tRemove the key lock function by setting the KEY |
|
| INHIBIT sub menu of the SETUP MENU to OFF. |
|
|
|
ABNORMAL SETTINGS | ILL. SETUP! | The settings made using the SETUP MENU are wrong. |
SELECTED IN SETUP MENU. |
| Push any button to make the alarm message disappear, |
SET ITEMS IN THE SETUP MENU TO |
| then perform the following operation. |
THE APPROPRIATE VALUES. CONTACT |
| tCorrect the SETUP MENU settings (see page 47). If |
SERVICE IF THIS ALARM APPEARS |
| the settings made are deactivated again or this |
AGAIN AFTER ABOVE PROCEDURE. |
| message appears again, contact your nearest Sony |
|
| dealer. |
|
|
|
NO DISC. | NO DISC! | There is no disc loaded. |
INSERT A DISC. |
| tLoad a disc. |
|
|
|
DISC CANNOT BE PLAYED BACK. | PAL DISC! | A disc recorded using the PAL video signal system has |
USE DISC WITH NTSC RECORDING. |
| been loaded in the unit with the NTSC video signal |
|
| system set as the default. |
|
| tLoad a disc recorded using the NTSC video signal |
|
| system. |
|
|
|
DISC CANNOT BE PLAYED BACK. | NTSC DISC! | A disc recorded using the NTSC video signal system has |
USE DISC WITH PAL RECORDING. |
| been loaded in the unit with the PAL video signal system |
|
| set as the default. |
|
| tLoad a disc recorded using the PAL video signal |
|
| system. |
|
|
|
NOT SUPPORTED DISC. | Not supported! | A disc that cannot be used with the unit has been loaded. |
USE DVD+RW DISC. |
| The message disappears when the disc tray is opened. |
|
| tUse a DVD+RW disc that can be used with the unit. |
|
|
|
LOADING TIME OVER. | LOADING ERROR! | The unit cannot recognize the disc. |
|
| tCheck the disc or replace the disc with another one. |
|
|
|
DISC ERROR. | DISC ERROR! | The unit failed in accessing the disc. |
|
| tCheck the disc or replace the disc with another one. |
|
|
|
RECOVERING THE DISC. | Recovering... | The disc is being recovered. |
PLEASE WAIT. |
| tWait until the message disappears. |
|
|
|
CANNOT RECOVER. | Can't Recover! | The unit failed in recovering. |
CHANGE THE DISC. |
| tReplace the disc with another one. |
|
|
|
FINALIZING THE DISC. | Finalizing... | The unit is finalizing the disc. |
PLEASE WAIT. |
| tWait until the message disappears. |
|
|
|
CANNOT FINALIZE THIS DISC. | Fin. Failed! | The unit failed in finalizing. |
CHECK THE DISC. |
| tReplace the disc with another one. |
|
|
|
FORMATTING THE DISC. | Formatting... | The disc is being formatted. |
PLEASE WAIT. |
| tWait until the message disappears. |
|
|
|
CANNOT FORMAT THIS DISC. | Init. Failed! | The unit failed in formatting. |
|
| tReplace the disc with another one. |
|
|
|
54 Messages