5 Select the desired mode by pressing the V or v button.

Mode

Setting

 

 

LOW EDGE

To start recording when you push

 

the foot switch, or to pause

 

recording during recording.

 

Even if you release the foot switch,

 

the recording or pause recording

 

status remains in effective. (Factory

 

setting)

 

 

HIGH EDGE

To start recording when you push

 

the foot switch and release it, or to

 

pause recording during recording.

 

The unit does not change from one

 

operation to another when you push

 

the foot switch.

 

 

LOW ACTIVE

While you hold the foot switch

 

down, the unit records. When you

 

release the foot switch, the unit

 

pauses.

 

 

Notes

•Be sure to turn off the power of the unit by using the 1 (power) switch on the front panel of the unit.

For detailed information on how to turn off the power of the unit, see “Turning the Power Off” on page 15.

•When not using the RM-P110, be sure to set the KEYBOARD sub menu of the SETUP MENU to OFF (see page 47).

To add information to the title or edit title information

The TITLE INFO display of the title menu allows you to edit title information.

Title name

Recording

6 Press the SET button.

The message “NOW SAVING...” appears and the unit starts to save the setting.

When the saving is completed, the message disappears and the unit returns to the normal display.

Adding Information to Titles

When you record data, the recording month/date/year/ hour/minute/second (example: 01/06/04 17:25:19) is recorded automatically.

Also, the RM-P110 remote control unit (not supplied) allows you to change the title name and to record data of 2048 bytes every title using the keyboard of the RM- P110. Thus, you can record additional information for a title.

To use an RM-P110 (not supplied) as a keyboard for editing/adding title name and information

You should carry out the following operation and menu settings:

•Connect the RM-P110 to the RS-232C connector of the unit.

•Set the REMOTE I/F sub menu (see page 47) of the SETUP MENU to RS232C.

•Set the KEYBOARD sub menu (see page 47) of the

SETUP MENU to ON.

You can enter characters in overwrite mode. Use the ESC key for the backspace function.

Title information (data of 2048 bytes)

For detailed information, see “Verifying/Editing Information About the Title” on page 42.

When you record using equipment such as external equipment, data is recorded via the communication protocol.

Pre Rec Function

When the PRE REC sub menu of the SETUP is set to “ON,” the unit saves the last 5 seconds of video data in the inernal memory. This function allows the unit to start recording the last 5 seconds of video data saved previously for continuity.

1 Press the MENU button.

Recording 29