Overview

Location and Function of Parts

Front Panel

11 (Power) switch and standby indicator

2 Disc tray

3 OPEN/CLOSE button

7 Disc control section

8 Menu/disc control section

6Front panel display

5REMOTE 2 connector

4REMOTE 1 connector

11 (power) switch and standby indicator

Press to power on the unit when the MAIN POWER switch (see page 11) on the rear panel is turned on. This causes the front panel display to light. Even if this switch is set to off, the indicator is lit in green when the MAIN POWER switch is set to on. To power off the unit, press this switch again.

Note

4REMOTE 1 connector (stereo mini jack) Connect a SVRM-100A remote control unit (not supplied) to this connector for remote control.

5REMOTE 2 connector (mini jack) Connect a foot switch (not supplied) to this connector. You can control recording and pausing using this foot switch.

If the MAIN POWER switch on the rear panel is not set to on, the power is not on even if you press the 1 (power) switch.

2Disc tray

Used to insert or remove the disc.

3OPEN/CLOSE button

Press to open or close the disc tray.

8 Location and Function of Parts