7 To end the menu operation, set the MENU ON/OFF/PAGE switch to OFF.

The setup menu disappears from the viewfinder screen and the displays indicating the current status of the camcorder appear along the top and bottom of the viewfinder.

If data cannot be read

If when you press the rotary encoder in step 6 of the above procedure

(page 4-122) one of the following error messages appears, then the data 4 was not read.

Reading white data for AWB

The white data for AWB can be read from a card only when WHITE DATA READ is set to ON.

Data read error messages

Error message

Reason

Action

CARD NOT

No setup card is inserted.

Close the menu and insert

INSERTED!

 

or reinsert the card.

 

 

 

READ ERROR!

Circuit or card fault

Re-check, and consult a

(flashing)

 

Sony representative.

 

 

 

CARD DATA NG!

The card contains the data

Do not try to read the data

(flashing)

that cannot be read into

written for another

 

this camcorder.

camcorder.

 

 

 

 

 

(Continued)

Chapter 4 Adjustments and Settings for Recording 4-123