5-1 Power Supply

You need to power on the camcorder for the flange focal length adjustment, viewfinder focus and screen adjustment, etc., which are described later.

The following power supplies can be used with the camcorder.

•A BP-L60A/L90A lithium-ion battery pack

•An NP-1B or a BP-90A Ni-Cd battery pack

•AC power using AC-550/550CE or AC-DN1/DN2A Alternatively, you can make combined use of internal and external batteries, by mounting one of the above batteries as an internal battery and connecting an external battery that can be a BP-90A contained in a DC-210 Battery Adaptor and connected to the DC IN connector of the camcorder.

5-1-1 Using a BP-L60A/L90A Battery Pack

With a battery pack, the camcorder will operate continuously for the time listed in the table below.

Approximate continuous operating time with BP-L60A/L90A Battery Pack

 

DVW-707/707P DVW-709WS/

DVW-790WS/

 

 

709WSP

790WSP

 

 

 

 

BP-L60A

135 minutes

125 minutes

120 minutes

 

 

 

 

BP-L90A

205 minutes

190 minutes

185 minutes

 

 

 

 

Before use, charge the battery pack with a BC-L100/L100CE Battery Charger. It takes about 2.5 hours to charge one BP-L60A, and about 3.5 hours to charge one BP-L90A.

For more information, refer to the BC-L100/L100CE manual.

Note on using the battery pack

A warm battery pack may not be able to be fully recharged.

Chapter 5 Setting Up the Camcorder 5-1

5

Camcorder the Up Setting