E01*MARKER

1/3

 

 

 

 

pSAFETY

ZONE

:

ON

SAFETY

AREA

:

90%

CENTER

 

:

ON

CENTER

H

:

0

CENTER

V

:

0

 

 

 

 

ON/OFF of safety zone marker indicator

 

Safety zone area setting

 

ON/OFF of center marker indicator

 

Setting of display position of center

 

marker (horizontal)

 

Setting of display position of center

4

marker (vertical)

 

MARKER 1/3 page (factory settings)

3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM until the cursor reaches the desired item (or use the rotary encoder).

4 For each item, operate the rotary encoder as follows (directions indicated as seen from the front of the camera).

CENTER or SAFETY ZONE selections: For an “ON” display setting, turn the rotary encoder counterclockwise; for an “OFF” display setting, turn the rotary encoder clockwise.

SAFETY AREA selection: To set the safety zone to 100% of the screen area, turn the rotary encoder counterclockwise, and to set the safety zone to 80% of the screen area, turn the rotary encoder clockwise.

CENTER H selection: To move the center marker to the right in the viewfinder, turn the rotary encoder counterclockwise, and to move the center marker to the left in the viewfinder, turn the rotary encoder clockwise.

CENTER V selection: To move the center marker up in the viewfinder, turn the rotary encoder counterclockwise, and to move the center marker down in the viewfinder, turn the rotary encoder clockwise.

(Continued)

Chapter 4 Adjustments and Settings for Recording 4-65