?E05*VF DISP | 2/2 |
|
|
| |
FILTER | : | ON |
WHITE | : | ON |
GAIN | : | ON |
SHUTTER | : | ON |
AUDIO | : | ON |
TAPE | : | ON |
IRIS | : | ON |
4
Filter indicator
White balance memory indicator Gain indicator
Shutter speed/mode indicator Monitor audio level indicator Remaining tape indicator Iris opening indicator
VF DISP 2/2 page (factory settings)
3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM until the cursor reaches the desired item (or use the rotary encoder).
4 Turn the rotary encoder to select whether the selected item should appear in the viewfinder display (the “ON” setting), or not appear (the “OFF” setting).
Note that pushing the MENU CANCEL/PRST/ITEM switch to CANCEL/PRST on this page has no effect.
To turn the setting of another item ON or OFF, repeat steps 3 and 4.
5 To end the menu operation, return the MENU ON/OFF/PAGE switch to OFF.
The setup menu disappears from the viewfinder screen and the display indicating the current status of the camcorder appears along the top and bottom of the viewfinder screen (when the viewfinder DISPLAY switch is set to ON).