2 Press the MENU ON/OFF/PAGE switch toward the PAGE position (or use the rotary encoder) until the OPERATION 2 page appears, as shown below.
E37*OPERATION | 2 |
| ||
|
|
|
| |
AWB | LEVEL | GATE | : | ON |
COLOR VF |
| : | COMP | |
REC | TALLY |
| : | UPPER |
pTIME | CODE | DISP | : | OFF |
4
3 Push the MENU CANCEL/PRST/ITEM switch toward the ITEM position.
Next press the rotary encoder, to display a question mark to the left of “TIME CODE DISP”.
4 Turn the rotary encoder to select whether or not to display or output the time code and other information.
To display or output the information: turn the rotary encoder counterclockwise as seen from the front of the camera to select one of the following settings.
•VF: display in the viewfinder.
•TEST: output from the TEST OUT connector.
•BOTH: display in the viewfinder and output from the TEST
OUT connector.
To neither display nor output the information: turn the rotary encoder clockwise as seen from the front of the camera to select “OFF”.
5 To exit from the menu, return the MENU ON/OFF/PAGE switch to OFF.