3 Check that there are no obstructions near the cassette lid, then press the EJECT button to open the cassette lid.

4 After checking the points below load the cassette, and close the cassette lid.

• The cassette is not write-protected.

3 • There is no slack in the tape.

• The leader tape is wound on the take-up reel.

Basic procedure for shooting : from adjusting the black balance and white balance to stopping recording

After turning on the power and loading a cassette, set the switches and selectors as shown below and begin operation.

DISPLAY: ON

Iris: Automatic

Zoom: Automatic

OUTPUT/ DCC: CAM,

DCC ON

AUDIO SELECT CH- 1/CH-2: AUTO

F-RUN/SET/R-RUN: F-RUN or R-RUN (set as needed)

Switch and selector settings before shooting

3-6Chapter 3 Recording and Playback