3 Connect the tuner power cord to the DC OUT connector of the camcorder, and the audio output cable to the AUDIO IN connector for channel 1 or 2.

Set the LINE/MIC/+48 V ON selector for the appropriate channel to MIC.

5

Set the AUDIO IN switch for the

DC OUT

appropriate channel to REAR.

AUDIO IN for CH-1 or CH-2

Fitting a WRR-28M (using an NP-1B or BP-90A Battery Pack)

Before attempting the following attachment, make sure that an NP-1B Battery Pack is contained in the DC-L1 Battery Adaptor or that a BP-90A Battery Pack is contained in the DC-L90 Battery Adaptor.

5-30Chapter 5 Setting Up the Camcorder