For more information about the use of this spare indicator, refer to “maintenance manual.”

6VTR SAVE indicator

This indicator lights when the VTR SAVE/STBY switch is set to SAVE. This indicator goes off during recording.

 

4-7-2 Setting the

Indicator

4

Select the items to be indicated by the indicator from the ‘!’ LED

page of the setup menu. Note that at the factory the ‘!’ page is not set for

display. To access the ‘!’ LED page, either set the camcorder to engineer mode, or select the ‘!’ LED page from the MENU SELECT page before use.

See Section 4-6-1 “Setup Menu Configuration” (page 4-39) for more information

about the engineer mode and selecting the display page.

Follow the procedure below to set the indicator.

1,2,6

2,4,5

3

Setting the indicator

1 Set the MENU ON/OFF/PAGE switch to ON.

4-50Chapter 4 Adjustments and Settings for Recording