Chapter 6 Maintenance
Set the time code.
2
1
Checking the functions of the user bits and time code
For more information, see Section 4-5-2 “Setting the Time Code” (page 4-29).
3 Set the F-RUN/SET/R-RUN switch to R-RUN.
4 Press the VTR START button, and check that the tape starts and that the counter indication changes.
5 Press the VTR START button again, and check that the tape stops and that the counter indication also stops changing.
6 Set the F-RUN/SET/R-RUN switch to F-RUN, and check that the counter indication changes regardless of whether the tape is running.
7 By setting the DISPLAY switch to DATA, and set the DATA DISPLAY switch to U-BIT, you can check that the user bit value set is displayed.
Set the user bits as required.
For more information, see Section 4-5-1 “Setting the User Bits” (page 4-27).
6
6