You can adjust the value of the white balance manually by setting the color temperature.
This setting is done in engineer mode. To change the camcorder to |
|
engineer mode, turn the power off, then turn it on again while pressing |
|
down the rotary encoder. | 4 |
To do this setting in user mode, go to MENU SELECT 4 in engineer | |
mode or store this item in the CAMERAMAN menu. |
|
For more details on this setting, refer to “maintenance manual.”
For information about the CAMERAMAN menu settings, see section
3
1,2
5
4
1 Set the camcorder to the engineer mode and turn the MENU ON/ OFF/PAGE switch to ON.
(Continued)
Chapter 4 Adjustments and Settings for Recording