When the RM-P9 Remote Control Unit is connected

You can set the shutter speed of CLS using the UP/DOWN switch of the RM-P9.

Changing the range of choice of shutter mode and speed settings

You can reduce the time required to select the shutter mode and speed by narrowing the choice of settings in advance. This can be done by using

the SHUTTER page of the setup menu.4 Follow the procedure below.

Note

The SHUTTER page cannot be accessed when a remote control unit is connected to the camcorder.

1,2,3,5

2,3,4

Changing the range of choice of shutter mode and speed settings

1 Set the MENU ON/OFF/PAGE switch to ON.

The page that was on the screen when the last menu operation ended appears on the viewfinder screen. (When this menu is first used, the lowest-numbered page of the currently selected pages for configuring the menu appears.)

(Continued)

Chapter 4 Adjustments and Settings for Recording 4-19