5-10 Connecting the Remote

Control Unit

Connecting the RM-B150 or RM-P9 Remote Control Unit (not supplied) enables remote control of the principal camera functions.

Turning the POWER switch of the camcorder to ON when the Remote Control Unit is connected to the REMOTE connector (8 pin), automatically puts the camcorder into remote control mode. If you disconnect the Remote Control Unit, remote control mode is canceled.

RM-B150

5

Remote

REMOTE

connector

Remote control cable (10 m) (about 33 ft), supplied with RM-B150

Connecting the remote control unit

Note

To connect the RM-P9 to the camcorder, you need the CCA-86-0.4 cable (not supplied) besides the remote control cable supplied with RM-P9.

5-42Chapter 5 Setting Up the Camcorder